What must I do to activate my warranty?

Register your warranty either by mail or online within 30 days of purchase. Retain proof of purchase. You can register your warranty here.

Who is covered under the warranty?

The original owner, and it is not transferable.

What is covered under the warranty?

Repair or replacement of a defective motor, electronic component, or defective part, and is the sole remedy of the warranty.

What is not covered under the warranty?

Normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible with the equipment as sold.

Damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, neglect, theft, vandalism, fire, flood, wind, lightning, freezing, or other natural disasters of any kind, power reduction, fluctuation or failure from whatever cause, unusual atmospheric conditions, collision, introduction of foreign objects into the covered unit, or modifications that are unauthorized or not recommended by Horizon Fitness.

Incidental or consequential damages. Horizon Fitness is not responsible or liable for indirect, special or consequential damages, economic loss, loss of property, or profits, loss of enjoyment or use, or other consequential damages of whatsoever nature in connection with the purchase, use, repair or maintenance of the product.

Equipment used for commercial purposes or any use other than a single family or household, unless endorsed by Horizon Fitness for coverage.

Equipment that is owned or operated outside the US and Canada.

Delivery, assembly, installation, setup for the original or replacement units or labor or other costs associated with removal or replacement of the covered unit.

Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is not responsible or liable for any damage, loss or liability arising from any personal injury incurred during the course of, or as a result of any repair or attempted repair of your fitness equipment are undertaken AT YOUR OWN RISK and Horizon Fitness shall have no liability.

How do I contact Customer Tech Support?

Phone: (800) 244-4192

E-mail: comments@horizonfitness.com

Mail: 1620 Landmark Drive, Cottage Grove, WI 53527

Monday through Friday, 8 a.m. to 5 p.m.

What information will I need to supply to Customer Tech Support?

The Customer Tech Support Department will need the Horizon Fitness model number, serial number and the nature of the problem (error messages, symptoms, description of what is not working, etc.) an address, a contact name and a phone number.

Where is the serial number located?

Please click on the following links below to view illustrations of where your serial number can be found.

• Horizon T73, T74, CST3.6, CST4.6, LS925T, RST5.6, RCT7.6
• All Horizon Treadmills (other than models listed above)
• Horizon EX-44, EX-33, EX-22, EGP5, CSE 3.5 and CSE 4.5 Ellipticals
• Horizon Ellipticals (other than models listed above)
• All Horizon Bicycles

What does "in home" use mean?

Our equipment is intended for private, residential use within a climate controlled room within your home. It is not intended for use by (but not limited to): Hotels, Resorts, Police and Fire Stations, Apartment Complexes, Rehabilitation and Sports Medicine Clinics, Hospitals, Elementary, Middle and High Schools, YMCA’s, Colleges, Universities, or Private/Public Health Clubs and business use of Personal Trainers.

How will Horizon Fitness products be serviced in the marketplace?

Horizon has partnered with independent service providers throughout the United States who will be called upon to provide fast, reliable "in home" service should it be necessary. If a problem arises once you take home your Horizon Fitness machine, please contact Customer Tech Support Department toll free at 1-800-244-4192 Monday through Friday, 8:00am - 5:00pm Central Time for assistance.

How do I get service outside of the USA?

Please contact the distributor for your country for more information about warranty and service. Products purchased within the USA are not covered under warranty outside of the USA. You can view a list of international distributors here.

Why do I need a 20 amp dedicated circuit?

The components of all of our units and the owner's guides are reviewed and certified by the ULCSE. This indicates that the information Horizon presents and the components used together are safe, in compliance and will not cause any problems. A 20 amp dedicated circuit is needed to insure the amount of power available to the unit is the most adequate as possible. Over time components will wear down and draw more power than what is available, causing the circuit to blow.

Where can I get additional copies of the weekly and monthly log sheets that were included in my owner's manual?

Please click on the following links below to download additional logs in PDF format. (Adobe Acrobat Reader required. If you don't have Adobe Acrobat Reader, click here.)

• Daily Log Sheets
• Weekly Log Sheets
• Monthly Log Sheets
• Strength Daily Log Sheets

Where can I find a parts diagram for my product?

Please refer to your owner's manual for a parts diagram.

Where is the best location to place my machine?

Place the machine on a level surface. There should be 6 feet of clearance behind the machine, 3 feet on each side and one foot in front for the power cord. Do not place the machine in any area that will block any vent or air openings. It should not be located in a garage, covered patio, near water or outdoors.

How often should I lubricate the deck of my treadmill?

It is recommmended that you lubricate underneath the running belt every 150 miles or every 3 to 6 months, even when it is not in use. Click here to view detailed instruction about how to lubricate the deck of your treadmill.

What brand of lubricant should I use on the running deck?

For treadmills manufactured after November 2002 use lubricant that is 100 percent silicon. It can be purchased from Horizon Fitness or from a sporting goods or other fitness retailer. Important: it must be 100 percent silicon and not have other ingredients mixed in. It comes in oil or spray, but oil usually lasts longer.

How do I tension or align my running belt?

Please click on the link below to download a PDF. (Adobe Acrobat Reader required. If you don't have Adobe Acrobat Reader, click here.)

What routine maintenance should I conduct on my treadmill?

After each use, clean and inspect, following these steps:

Turn off the treadmill with on/off switch, then unplug the power cord at the wall outlet.

Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use solvents, as they can cause damage to the treadmill.

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

Make sure the power cord is not underneath the treadmill or in any other area where it can become pinched or cut.

Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage any other components on the treadmill by being misaligned.

Every week, clean underneath the treadmill, following these steps:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Fold the treadmill into the upright position, making sure that the lock latch is secure.

Move the treadmill to a remote location.

Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.

Return the treadmill to its previous position.

Every month:

Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.

Inspect all assembly bolts of the machine for proper tightness.

Turn off the treadmill and wait 60 seconds.

Remove the motor cover. Wait until all display screens turn off.

Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated. Failure to do so may result in premature failure of key electrical components.

Vacuum and wipe down the belt with a damp cloth. Vacuum any black/white particles that may accumulate around the unit. These particles may accumulate from normal treadmill use.

Where can I learn more about the programs on my treadmill?

Please refer to your owner's manual for a complete description of the programs available on your machine.

How can I stop the loud beeping noise when the buttons on the console are pressed?

The beeping noise is a safety feature that all fitness equipment manufacturers include on the products. It alerts the user to a change during a workout that includes a change in the resistance level on an elliptical and the speed and/or incline on a treadmill.

What if the arms of my elliptical become very difficult to move or immovable?

Horizon Fitness has diagnosed a problem with the E500, E700 or E800 elliptical where the arms become very difficult to move, or become immovable. It is due to a bearing failure. Please contact Horizon Fitness Customer Tech Support. At no cost to you, we will provide a replacement bearing and schedule a technician to visit your home to professionally replace the part.

What routine maintenance should I conduct on my elliptical?

After each use:

Turn off the elliptical by unplugging the power cord from the wall outlet.

Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to the elliptical.

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

Make sure the power cord is not underneath the elliptical or in any other area where it can become pinched or cut.

After each week, clean underneath the elliptical, following these steps:

Turn off the elliptical by unplugging the power cord from the wall outlet.

Move the elliptical to a remote location.

Wipe or vacuum any dust particles or other objects that may have accumulated underneath the elliptical.

Return the elliptical to its previous position.

After each month:

Inspect all assembly bolts and pedals on the machine for proper tightness.

Clean any debris off of the pedal arm wheels and guide rails.

Where can I learn more about the programs on my elliptical?

Please refer to your owner's manual for a complete description of the programs available on your machine.

How can I stop the loud beeping noise when the buttons on the console are pressed?

The beeping noise is a safety feature that all fitness equipment manufacturers include on the products. It alerts the user to a change during a workout that includes a change in the resistance level on an elliptical.

Will the magnets in the ECB resistance system wear out over time?

Absolutely not. Since they do not make contact with the flywheel, they provide the same consistent, trouble free resistance for the lifetime of the machine.

How long will the poly-V drive belts last?

The computer modeling we had done indicated virtually thousands of maintenance free hours. Belts are now used in far more demanding applications such as motorcycle drives for example.

What routine maintenance should I conduct on my exercise bike?

After each use:

Turn off the bike by unplugging the power cord from the wall outlet.

Wipe down the bike with a damp cloth. Never use solvents, as they can cause damage to the bike.

Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.

Make sure the power cord is not underneath the bike or in any other area where it can become pinched or cut.

After each week, clean underneath the bike, following these steps:

Turn off the bike by unplugging the power cord from the wall outlet.

Move the bike to a remote location.

Wipe or vacuum any dust particles or other object that may have accumulated underneath the bike.

Return the bike to its previous position.

After each use:

Inspect all assembly bolts and pedals on the machine for proper tightness.

Clean any debris off of the seat guide rail.

Where can I learn more about the programs on my exercise bike?

Please refer to your owner's manual for a complete description of the programs available on your machine.

How can I stop the loud beeping noise when the buttons on the console are pressed?

The beeping noise is a safety feature that all fitness equipment manufacturers include on the products. It alerts the user to a change during a workout that includes a change in the resistance level on an exercise bike.

What routine maintenance should I conduct on my home gym?

After each use:

Wipe upholstery, handgrips, bars and frame (if needed) with a soap and water cleaning solution.

Check the cable tension.

After each week:

Lubricate guide rods with a spray or silicone gel lubricant.

Inspect all frame bolts and tighten as needed.

Check the cable tension.

After each month:

Inspect all frame bolts and tighten as needed.

Check the cable tension.

How do I adjust the cable tension?

If excessive slack exists, adjust cable tension by removing the pulley bolts and moving one or both pulleys to the inner mounting position in the dual floating pulley bracket and then reinstalling the pulley bolts.

Cable tension may also be adjusted using the threaded cable end on single pulley bracket and weight stack. Twist threaded end to adjust tension and then tighten lock nut. NOTE: Always maintain at least one-half inch of threaded bolt in bracket. Refer to your owner's manual for illustrations of this process.